Product parameters Additional parameters Related products

Product parameters

Net Weight

0.071 kg
Height

23 mm
Length

78 mm

Sustainability

+
Width

106 mm

Additional parameters

Model

Integrable
Mounting method

Side mounting
Number of contacts as change-over contact

2
Number of contacts as normally closed contact

0

Number of contacts as normally open contact

0
Number of fault-signal switches

0
Rated operation current Ie at AC-15, 230 V

240 A
Type of electric connection

Screw connection

Description

This Acti9 NG125 electrical auxiliary is an open/close and fault indicating contact mounted on DIN rail. It is dedicated to Acti9 NG125, NG125NA and NG125LMA. It is used for remote indication of the position of the associated device. The 2 contacts changeover indicates "open" or "closed" position of the associated device, and the position of the associated device in the event of electrical fault or actuation of the tripping auxiliary. The width in 9mm pitches is 1. The operating frequency is between 50Hz and 60Hz. It also works on direct current. The In rated current is from 0.1A to 6A at 240VAC, 0.1A to 3A at 415VAC, 0.1A to 1A at 130VDC, and 0.1A to 3A at 48VDC. The Ue rated operational voltage is up to 415VAC and 130VDC. The dimensions are (W) 15.3mm x (H) 102.8mm x (D) 75.5mm. The operating temperature is from -25°C to +60°C. The storage temperature is from -40°C to +85°C. This product complies with IEC/EN 60947-5-1 standards.