Product parameters

Net Weight

5.6 kg
4G

No
Bluetooth

No
Cable length

5 m
Colour

White
Ethernet

Available
Impact protection

IK10
Ingress Protection

IP55
Phases

3
Power

11 kW

Product series

EVlink Home
Rated voltage

400 V
Socket type

Type2
Sustainability

+
Wi-Fi

Nav
With cable

Yes

Additional parameters

Compatible with Amazon Alexa

-
Compatible with Apple HomeKit

-
Compatible with Google Assistant

-
Degree of protection (IP)

IP55
Depth

148 mm
Function access control

-
Height

409 mm
IFTTT support available

-
Impact strength

IK10
Installation side connection model

3-phase
Length of charging cable

5 m
Material housing

Plastic
Max. power per charging point

11 kW
Mounting method

Wall mounting
Nominal connection power

11 kW
Number of CEE socket outlets

0
Number of charging units

1
Number of earth leakage circuit breakers type A

0
Number of earth leakage circuit breakers type B

0
Number of household socket outlets

2

Number of socket outlets GB

0
Number of socket outlets Type 2

0
Number of socket outlets Type 3

0
Number of vehicle connectors CHAdeMO

0
Number of vehicle connectors GB AC

0
Number of vehicle connectors GB DC

0
Number of vehicle connectors Type 1

0
Number of vehicle connectors Type 1 CCS

0
Number of vehicle connectors Type 2

1
Number of vehicle connectors Type 2 CCS

0
Supporting protocol for CAN

-
Supporting protocol for MODBUS

+
Width

282 mm
With circuit breaker

-
With communication interface

-
With display

-
With energy meter

-
With house connection box

-
With load management

+

Description

This EVlink Home product is a wall-mounted charging station for all electrical vehicles compliant with IEC61851-1 standard. The IP degree of protection is IP55. The IK degree of protection is IK10. The operating temperature is between -30°C and 50°C. The output type is a 5m attached cable with a T2 socket-outlet at the end, installed at the bottom and top centre of the station. The nominal output power is 11kW. It is supplied in three-phase (3P+N). The rated charging current is 16A under 400VAC at a 50Hz frequency with a tolerance of +/-10%. It can be used with a TN-S or TT earthing system. The charging station is easy to install (no special tools required). It is recommended for private use at home, installed in the garage for instance. The dimensions are (W) 282mm x (H) 409mm x (D) 148mm. Its product weight is 5.6kg. Its color is white (RAL9003). It is fitted with a built-in protection against residual direct current (RDC-DD as Residual Direct Current Detecting Device). There is no access control to use the charging station for loading an electrical vehicle. A red push-button is present in case of emergency stop. One LED is changing color between red, green and blue in order to indicate the loading status directly on the charging station. By complementing the charging station with the anti-tripping system, it benefits of the dynamic energy management. This one allows to adjust in real time the maximum power allocated to the charging electric vehicle, according to the consumption of the rest of loads in the house.