LED headlamp 1800lm

The new Nitecore HC33 is the most powerful head torch in our range with a staggering output of 1800 lumens. Utilising a Cree XHP35 HD LED with a lifespan of 50,000 hours the HC33 puts out an incredible amount of light from a small and lightweight headlamp.

Please note: The HC33 can be powered by an 18650 battery, however it MUST have an output of 8A or higher.

Click here: Nitecore NL1835HP 8A Li-ion 18650

Featuring a wide angle reflector with Nitecore's crystal coating technology, the HC33 emits a beam up to 187 meters with a 100 degree spread, making it a very versatile with a good combination of range and flood for multiple applications.

The included headband is made from quality elastic nylon, which is comfortable and can also be worn over a helmet. A rubber bracket holds the torch in place and allows the light to be angled up or down easily with one hand. The HC33 can also be used as a hand held light and includes a pocket clip for this purpose. The tail cap has a magnet inside allowing for attachment to metal surfaces for even more hands free uses such as when working on motor vehicles.

Powered by one 18650 (output ≥ 8A) Li-ion battery or two CR123. Five brightness levels (runtimes shown below are with 18650 Li-ion) plus SOS and flashing modes accessed by the single switch for one handed operation:

Brightness Levels and Runtimes

Turbo: 1800 lumens - 30 min runtime

High: 780 lumens - 1 hr 30 min runtime

Mid: 240 lumens - 5 hr 45 min runtime

Low: 70 lumens - 16 hr 30 min runtime

Ultralow: 1 lumen - 330 hr runtime

Plus three special modes: Strobe, SOS and Beacon.

Waterproof to IP68 (two meter submersible) and impact resistant from drops up to 1.5 meters.

Constructed from aero grade aluminium alloy with HAIII hard anodised finish to cope with all environments.

Operating Instructions

On / Off
Turn on: When the light is off, press and hold the switch for 0.6 seconds to turn the light on.
Turn off: When the light is on, press the switch for 0.6 seconds to turn off the light.
Instant Ultra Low: When the HC33 is off tap the switch.
Instant Turbo: With the light off, press and hold the switch for 1.5 seconds.

Adjusting Brightness
With the HC33 switched on, press the switch repeatedly to cycle though the brightness levels. Intelligent memory function remembers the last mode used.

Special Modes (Strobe / SOS / Beacon)
When the light is off, quickly tap the headlamp switch twice to enter strobe. After strobe is turned on, tap the switch repeatedly to cycle through SOS-Beacon-Strobe. Turn off the light to exit (special modes are not memorised).

Includes: Headband, pocket clip, and spare o-rings.