Wireless indication auxiliary contact, ComPacT NSX and ComPacT NS, circuit breaker status OF/SD/SDE

This is a wireless auxiliary contact that provides remote indications of the circuit breaker status. It is used on ComPacT NSX 100 to 630 and ComPacT NS 630 to 3200 new generations. This wireless auxiliary contact provides OF information (ON/OFF), that indicates the position of the circuit breaker power contacts. It provides SD information (trip indication), that indicates that the circuit breaker as tripped due to an electrical fault, operation of a voltage release or push to trip button. It provides SDE information (fault trip indication), that indicates that the circuit breaker as tripped due to an electrical fault (overload, short-circuit, ground fault, earth fault). This wireless auxiliary contact works with Zigbee wireless communication protocol (IEEE 802.15.4) within the frequency range 2405-2480MHz . It is a plug & play technology for clear connection status. This wireless auxiliary contact is placed in the same position as the wired version. A LED light is integrated and gives an indication in case of tripping. Communication architecture is fully EcoStruxure Power validated, with any application.

• Plug & play technology for clear connection status (0 or 1, no half-way wired)
• Placed in the same position as the wired version
• Its LED light will give you direct indication in case of a tripping
• It will send you an immediate notification via EcoStruxure Facility Expert
• Wireless auxiliary contact accelerates overall wiring time
• Status communication is done very simply and commissioned wirelessly
• Communication architecture is fully EcoStruxure Power validated, with any application