Line-Voltage Fan Coil Room Controller: BACnet MS/TP, RH sensor & control, PIR motion sensor, White C

SER8300 Series room controllers are used for Line Voltage Fan Coil Unit control with SC3000 Relay Packs. The room controllers rated supply voltage is 7V DC at 2.4 watts or 24V AC 50/60Hz Class 2, 4VA. The room controller is colored white and is equipped with a communication port that uses BACnet MS/TP protocol and a PIR sensor. Its Room and Outdoor Air Temperature Display Range is between -40 and 50 °C. The measurement accuracy is +/- 0.5%. The temperature setting range is 12 to 37.5 °C for cooling and 4.5 to 32 °C for heating. The room controller is equipped with 2 digital inputs, 5 analog inputs (5 to 10V), 4 analog outputs, and 5 digital outputs. The analog output voltage is 0 to 10V DC at < 5mA into > 2 kOhm resistance. The digital output rating is 28V AC 50 or 60 Hz, 0.3A, 1.5A inrush current. The product follows the following standards: IEC 61326-1: 2005, FCC part 15 subpart C, RSS 210 issue 8, FCC part 15 subpart B, ICES-003, EN 60950-1: 2006/A2, EN 60950-1: 2013, ETSI EN 301 489-1: v1.9.2. The product follows the directives: 2014/30/EU - electromagnetic compatibility, 2014/35/EU - low voltage directive, 2014/53/EU - radio equipment directive. The ambient air temperature for operation is between 0 and 50 °C. The relative humidity for operating or storage is between 0 and 75% non condensing. The humidity reading range is 10 to 90% RH non-condensing.

• Elegant style combinations, designed to complement any decor
• Colored Touch screen interface with multi language support
• Reduce installation time, no complex software or tools required to customize functionality to meet your requirements
• Different connectivity options by supporting Wired and wireless protocols
• Ideal for retrofit sites with Remote relay pack connectivity using 3 wire cable
• PIR motion sensor built-in to improve energy efficiency and automated setpoint