Name: servo motor BCH, Lexium 28, 130mm, 2000W, 14.1kg.cm², with oil seal, with key, brake, straight conn
Brand: Schneider Electric
SKU: 9673683
Price: 1482.47 EUR
Availability: PreOrder

Product parameters Additional parameters Related products

Product parameters

Net Weight

12.328 kg
Sustainability

+

Additional parameters

Bearing

Ball bearing
Breakdown torque ratio

0
Construction type

IM 3001 (B5)
Cooling method

Other
Degree of protection (IP)

IP54
Duty cycle

Other
Frame size acc. IEC

130 mm
Full-load efficiency

- %
Insulation class acc. IEC

F
Intrinsic safety (IS)

None
Material housing

Other
Model

Rotary current synchronous motor
Motor efficiency class

Other
Nominal torque

2.86 Nm
Number of phases

3
Number of poles

0
Operation temperature

0 .. 40 °C
Output power anti-condensation heater

- W

Overload capability

+
Power factor

-
Rated current

2.6 A
Rated frequency

50 .. 60 Hz
Rated performance at rated frequency

0.3 kW
Rated rotational speed at rated frequency

3000 1/min
Rated voltage

220 V
Shaft end type

Parallel key
Starting current ratio

0
Starting torque ratio

0
Suitable for frequency control

-
Vacuum pressure impregnation (VPI)

Other
Voltage anti-condensation heater

- V
Voltage type

AC
With anti-condensation

-
With positive temperature coefficient resistor (PTC)

-
With resistance temperature detector (RTD)

-

Description

This product is part of the Lexium 28 range, an offer of servo motors from 0.05kW to 4.5kW. The servo motor features maximum mechanical speed of 3000RPM and keyed shaft end with holding brake. It is an equipped with a 20bit single-turn absolute encoder. It is a second generation servo motor with a rated supply voltage of 220V, a continuous stall current of 9.95A and a continuous power of 2000W. The shaft dimensions are 22mm (diameter) x 55mm (length). It is furnished with MIL connector for electrical connection. It is an IP50 and IP65 rated product. The length of this product is 216mm and the centering collar dimensions are 8mm (depth) x 110mm (diameter) with 145mm mounting hole. It weighs 11kg. It is suitable for machine control solutions. This range is compatible with Lexium 28 servo drives. This product is compatible with LXM26D servo drive motor at 2kW 220V three phase. It supports 130mm Asian standard flange mount with a natural convection cooling system. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.