+371 66 77 88 20
b2b@elektrika.lv 
This Acti9 iCM is a selector switch used for the manual control of electric circuits with key. It is 2 positions switch with contacts type 1 NO+1NC. The phase-separated wall can be divided to allow all the types of com busbar to pass through. It comes with staggered terminals to simplify connection. The tightening torque of connection is 1N.m for PZ1 screwdriver type. The Ue rated operational voltage is 415VAC. The Ie rated operational current is 10A. The operating frequency is 50Hz. The connection allows rigid copper cables from 0.5mm² minimum to 2x2.5mm² maximum. The connection allows flexible or with ferrule copper cables from 0.5mm² minimum to 2x2.5mm² maximum. The number of cycles open and close (O-C) is 1000000. The endurance is 200000 operations with AC21A current category under cos phi=0.8. The width in 9mm pitches is 4. The dimensions are (W) 36mm x (H) 60mm x (D) 72mm. The pollution degree is 3. The tropicalization is treatment 2 (relative humidity 95% at 55°C). The operational temperature is from -20°C to +55°C. The storage temperature is from -25°C to +80°C. It complies with VDE 0660 part 107, IEC/EN 60947-3 and UL standards.
Cables and wires 
Installation 
Automatics and control 
Lighting 
Renewable energy 
Tools 
Power tools and accessories 
Industrial products 
Lightning protection 
Insulating materials and chemistry 
Heating and ventilation 
Computers and Telecommunications 
Work wear and accessories 
Consumer electronics 
Smart Home 
For garden, leisure and tourism 
