Change-over system

-

Connection

Flange

Connection voltage

1 x 230 V AC

Device position

Inside positioning

Efficiency exhaust filter according to ISO 16890-1:2016

50.00 %

Efficiency supply filter according to ISO 16890-1:2016

70.00 %

Electrical connection

Terminals

Exhaust filter according to ISO 16890-1:2016

ISO ePM10

Fan type

Direct

Frost protection circuit

-

Heat recovery by

Cross counter current unit

Height

425.00 mm

Length

1750.00 mm

Material housing

Steel, lined

Max. air volume at 50 Pa

921.52 m³/h

Max. air volume at 100 Pa

863.95 m³/h

Max. air volume at 150 Pa

802.95 m³/h

Max. air volume at 200 Pa

737.39 m³/h

Max. air volume at 250 Pa

663.39 m³/h

Max. air volume at 300 Pa

580.82 m³/h

Max. air volume at 400 Pa

389.69 m³/h

Max. air volume at 500 Pa

96.00 m³/h

Max. air volume at 600 Pa

- m³/h

Nominal duct diameter inside connection

250.00 mm

Nominal duct diameter outside connection

250.00 mm

Nominal duct height, inside connection

- mm

Nominal duct height, outside connection

- mm

Nominal duct width, inside connection

- mm

Nominal duct width, outside connection

- mm

Power consumption

0.21 kW

Suitable for electronic control

+

Suitable for low-current control

+

Suitable for transformer control

-

Supply filter according to ISO 16890-1:2016

ISO ePM1

Thermal efficiency

93.00 %

Type of cooling coil

None

Type of heating coil

Hot water heat exchanger

Type of motor

Electronically commutated (EC)

Width

1750.00 mm

With bypass

+

With condensate drain

+

With constant pressure control

-

With constant volume flow control

-

With roof plate

-

With rotational speed/frequency control

-

With support frame

-

With thermal protection

+