Tap off unit, Canalis KN, for NF cylindrical fuses, 25A, 3L+N+PE, fuses not provided, IP55

This is a 4 poles tap off unit with fuse holders for Canalis KN busbar trunking with plug-in outlets. It is used for rapid connection of loads or secondary lines in compliance with installation standards IEC 60364 and regulations concerning TT, TNS and TNC earthing systems. The rated operational voltage is from 230VAC to 500VAC 50/60Hz depending on protective device. The rated operational current is 25A. The rated operational voltage is from 230VAC to 500VAC 50/60Hz depending on protective device. It is be equipped with fuse holders for NF cylindrical fuses 10x38, gG or aM type (fuses not supplied). The tap-off unit polarity is 3L+N+PE or 3L + PE, disconnection by drawing out. Door/cover could be open front side. Tap-off unit cover can be lead sealed to prevent circuit breaker switching by unauthorised persons. It is suitable for TT, TN-S and TN-C earthing system. The colour is white RAL 9001. Cable clamp is supplied. It provides IP55 protection degree conforming to EN/IEC 60529. It provides IK08 mechanical impact degree conforming to EN/IEC 62262. It is compliant with IEC 61439-1 and IEC 61439-6. It is compliant with Schneider Electric Environmental Data Program (RoHS, REACh, Product Environmental Profile, End of Life Instructions).

• Busbar trunking system for power distribution from 40A up to 160A
• Flexible, scalable, modular and upgradeable system
• Easy selection process
• Quick, light and easy mounting solution
• High protection degree IP55 for all types of buildings
• Fool proof system avoids unit being installed or removed under load
• All components are halogen free, no toxic emission of any fumes in case of fire
• Sustainable by being reusable, recyclable and reduces line losses by 20%