Product parameters Additional parameters Description Similar products

Product parameters

Net Weight

0.068 kg

Additional parameters

1st interval

-
1st interval unit

Seconds/minutes
2nd interval

-
Control voltage 1

24 .. 230 V
Function

Multi function
Mounting method

DIN rail
Nominal switching current at 250 V AC

8 A
Number of changeover switches

-
Number of contacts as normally closed contact

-

Number of contacts as normally open contact

-
Switch capacity fluorescent lamp DUO

650 VA
Switch capacity fluorescent lamp inductive

650 VA
Switch capacity fluorescent lamp parallel

500 VA
Switch capacity incandescent lamps

1500 W
Type of control voltage 1

AC/DC
Type of excitation

Analogue with multi function
Voltage type of supply voltage

AC/DC
Width in number of modular spacings

-

Description

10 functions with START and RESET control input.
Purpose
Timing relays are devised to time the control of industrial and domestic automatic control engineering systems (e.g. ventilation, heating, lighting, signalling, etc.).

Functioning
The relay performs a function selected in accordance with the regime set period. The choice of a specific range of time and work the relay function is to set the appropriate combination of rotary coded switches.=

Attention!
*Setting the time range knob regulator in the:
ON - position with power supply activated results in the permanent closure of the contact in position 3-7 (UNI) and 11-12 (DUO).
OFF - position (power supply activated) causes the contact to be permanently closed in the position 3-5 (UNI) and 11-10 (DUO).
*With the power supply on, the system does not respond to the modification of time range and operation mode.
*The newly set time range and operation mode values are active after the power supply is turned off and on or after the RESET voltage is supplied.
* With the power supply on, it is possible to regulate the preset time freely within the selected time range.
*If the function is changed into F, G, H, I, or J, one with the power supply on, and the START voltage is supplied, the system will carry out the previous function and then reset (switch into the newly selected function). A further instance of the START voltage supply will result in executing the new function.