+371 66 77 88 20
b2b@elektrika.lv 
This Acti9 iRCP is a Phase control relay. The voltage measurement range is 0.15VAC to 10VAC. It monitors phases and the presence of voltage on the 3 phases of a 3 phase circuit power supply. It indicates also any phase loss or inversion. It supplies 1 fail-safe change-over contact. The parameter setting is done on the front panel by direct scale by using a screwdriver. It could be used for example to control the power supply of a 3-phase motor. The precision of the display is +/- 10% of the full scale. The time delay on tripping is 0.3s. The Uc supply voltage is 400VAC +/- 15%. The operating frequency is 50Hz or 60Hz. The output by changeover contact current is 8A under 250VAC with cos phi equal to 1. On the front face green led indicates the voltage presence. The red led indicates a fault. The consumption is 3VA. The dissipated power is 2W. The width in 9mm pitches is 4. The degree of protection is IP20. The dimensions are (W) 36mm x (H) 88,1mm x (D) 65mm. The operating temperature is -5°C to + 55°C. The storage temperature is -40°C to + 80°C.
- Monitors phases and the presence of voltage on the 3 phases of a 3 phase circuit power supply
- Indicates any phase loss or inversion
- Supplies one fail-safe change-over contact
- Parameter setting is done on the front panel by direct scale using a screwdriver
- Compatible with 35mm symmetrical DIN rail
Cables and wires 
Installation 
Automatics and control 
Lighting 
Renewable energy 
Tools 
Power tools and accessories 
Industrial products 
Lightning protection 
Insulating materials and chemistry 
Heating and ventilation 
Computers and Telecommunications 
Work wear and accessories 
Consumer electronics 
Smart Home 
For garden, leisure and tourism 
