Product parameters Additional parameters Related products

Product parameters

Net Weight

0.11 kg
Height

75 mm
Length

18 mm

Sustainability

+
Width

85 mm

Additional parameters

Built-in depth

43.5 mm
Control voltage 1

48 .. 48 V
Control voltage 2

24 .. 24 V
Frequency control voltage 1

50 .. 60 Hz
Function

Mechanical switch
Manual operation

+
Manual operation possible

+
Max. incandescent lamp load

1600 W
Max. load fluorescent lamp

1300 VA
Max. load fluorescent lamp (Duo circuit)

2000 VA
Max. load fluorescent lamp (parallel compensated)

900 VA
Max. switching current (cos phi = 0.6)

16 A
Mounting method

DIN rail
Number of change-over contacts

0.0

Number of contacts as change-over contact

0
Number of contacts as normally closed contact

0
Number of contacts as normally open contact

2
Number of normally closed contacts

0.0
Number of normally open contacts

2.0
Rated excitation voltage

24 .. 48 V
Rated operation current

16 A
Rated switch current

16 A
Supply voltage

24 .. 250 V
Type of control voltage 1

AC
Type of control voltage 2

DC
Voltage type of supply voltage

AC
Width in number of modular spacings

1

Description

This Acti9 iTL is a modular impulse relay. This 2P device has 2 normally open contacts. Rated current is 16A, 24VAC to 250VAC operating voltage and it operates with 48VAC or 24VDC control voltage. Electrical endurance goes up to 200000 cycles for AC-21 or 100000 cycles for AC-22. The switching frequency is 100 switching operations/day or 5 switching operations/minute. The duration of the command order should be between 50ms to 1s. It is mainly used for lighting control applications. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. It is DIN rail mountable. Pollution degree is 3. Overvoltage category is IV. The dimensions are (W) 18mm x (H) 84mm x (D) 60mm. The degree of protection is IP20 and IP40 in an enclosure. The operating temperature is from -20°C to 50°C. The storage temperature is from -40°C to 70°C. This product is compliant with IEC/EN 60669-1 and IEC/EN 60669-2-2 standard.

Consistent with the entire Acti9 offer and with all types of lighting
Compliant with EN 669-2-2 and EN 669-1 standards
A simple clip-on system for flexible auxiliaries combination and improved robustness
Closing of the impulse relay pole(s) is triggered by an impulse on the coil
Disconnection of remote control by selector switch for maintenance operation
Direct and priority manual control by O-l toggle on front face
Can be controlled by an unlimited number of pushbuttons