Product parameters Additional parameters Related products

Product parameters

Net Weight

0.006 kg
Height

45 mm
Length

65 mm

Sustainability

+
Width

270 mm

Additional parameters

Closing plate required

+
Colour

Grey
Connectable conductor cross section fine-strand with cable end sleeve

0.2 .. 2.5 mm²
Connectable conductor cross section fine-strand without cable end sleeve

0.2 .. 2.5 mm²
Connectable conductor cross section multi-wired

0.14 .. 2.5 mm²
Connectable conductor cross section solid-core

0.14 .. 4 mm²
Connection position

Atop
Depth

48.5 mm
Explosion-tested version 'Ex e'

+
Height

36.5 mm
Height at lowest possible mounting height

36.5 mm
Inflammability class of insulation material acc. with UL94

V0
Internally connected stages

-

Length

48.5 mm
Material insulation body

Thermoplastic
Mounting method

DIN rail (top hat rail) 35 mm
Number of clamp positions per level

2
Number of levels

1
Operation temperature

-40 .. 130 °C
Rated current In

24 A
Rated voltage

800 V
Suitable for conductor material

Aluminium/copper
Type of electrical connection 1

Plug-in connection
Type of electrical connection 2

Plug-in connection
Width

5.2 mm
Width/grid dimension

5.2 mm

Description

Linergy TR is terminal block for Linergy. It belongs to linergy passthrough terminal block with 2.5 mm² nominal cross section. The rated operational voltage is 600V conforming to CSA/cURus and 800V conforming to EN/IEC 60947-7-1. The rated current is 24A conforming to EN/IEC 60947-7-1 and 20A conforming to CSA and cURus. It has grey surface treatment. Mounting by clip-on and top connection by single-level 1x1 push-in (upstream and downstream) terminals. It could be connection without tool and disconnection by flat screwdriver. It is compatible with spacial enclosures for Prisma G, Prisma P, Pragma, Prisma PH, Prisma Pack, Spacial, Kaedra, TeSys. Sold in lots of 50 units. Ambient air temperature for operation is from -40 to 130 °C conforming to IEC 60216-1 and VDE 0304-T21. Multi standards certified (VDE, LR, cURus, IEC-Ex, ATEX, EAC, GL, CSA). It is compliant with Green Premium (RoHS/REACH).

It belongs to linergy passthrough terminal block with 2.5 mm² nominal cross section
Mounting by clip-on and sideways connection by single-level 1x1 screw terminals
Releasing pressure on the sides stops the flow of cable ends
Facilitates storage by avoiding mixing cable ends of different sizes
Identifies the cross section of cable ends it contains