Product parameters Additional parameters Related products

Product parameters

Net Weight

0.046 kg
Height

80 mm
Length

20 mm
Product series

Acti 9 Lite

Sustainability

+
Width

85 mm

Additional parameters

Built-in depth

75 mm
Colour calotte

White
Degree of protection (IP)

IP40
Forced segregation (according to DIN VDE 0113)

+
Forced segregation according to DIN VDE 0113

+
Imprint/indication

None
Max. lamp power

- W
Min. rated voltage

250 V
Number of contacts as change-over contact

1
Number of contacts as normally closed contact

0

Number of contacts as normally open contact

0
Number of poles

2
Rated current

20 A
Rated switching capacity

- kA
Rated voltage

250 V
Short-circuit breaking capacity (Icw)

- kA
Switching function

Two-way switch
Voltage type

AC
Width in number of modular spacings

1
With signal lamp

-

Description

This Acti9 iSSW is a changeover switch used for the manual control of electric circuits. It is a 3 positions switch with 1 changeover contact (1 C/O). The phase-separated wall can be divided to allow all the types of com busbar to pass through. It comes with staggered terminals to simplify connection. The tightening torque of connection is 1N.m for PZ1 screwdriver type. The Ue rated operational voltage is 250VAC. The Ie rated operational current is 20A. The operating frequency is 50Hz. The connection allows rigid copper cables from 0.5mm² minimum to 2x2.5mm² maximum. The connection allows flexible or with ferrule copper cables from 0.5mm² minimum to 2x2.5mm2 maximum. The number of cycles open and close (O-C) is 30000. The endurance is 30000 operations with AC22 current category under cos phi=0.8. The width in 9mm pitches is 2. The dimensions are (W) 18mm x (H) 82mm x (D) 75mm. The pollution degree is 3. The tropicalization is treatment 2 (relative humidity 95% at 55°C). The operational temperature is from -20°C to +50°C. The storage temperature is from -40°C to +70°C. It complies with IEC 60669-1 and IEC 60947-5-1 standards.